Showing posts with label clothing. Show all posts
Showing posts with label clothing. Show all posts

Comfortable AND Fashionable Adapted Jeans

Back-to-school means new clothes. Jeans are the fashion choice for most kids. But for kids in wheelchairs or with feeding tubes, the waistbands on many jeans can be uncomfortable. How do we help our kids go back to school in style AND comfort?

A couple years ago, Junior’s mom posted this great tutorial on adapting jeans on her blog, Adaptions4Kidz. She has so many fantastic ideas there! If you haven’t bookmarked her site, I highly recommend that.

But there are decorative features on jeans that my daughter wanted preserved, so we came up with a slight variation to adapting jeans that made her happier and feeling very stylish. This variation also works well with junior girls’ tops that are shorter in length than boys’ t-shirts. Let’s celebrate back to school with some comfortable and fashion-forward (sh-h-h-h...pull-on) jeans!

Three pairs of adapted jeans
 You’ll need:

·        1 pair jeans

·        1 pair worn pull-on stretch pants or yoga pants (okay if they show wear in the knees or crotch, as these will be discarded. We recycled last year’s stretch pants)

·        Thread, seam ripper, sewing machine, serger (optional but nice)

1) Prepare the jeans.

·        Pick out the lower end of any belt loops using a seam ripper, being careful not to nick holes in the fabric. Cut off the remainder of the belt loop/s and discard.
 
·        Cut out the zipper, snipping away the zipper tape. Be sure to remove all teeth, the zipper stops at both ends, and the pull. This decreases bulk and increases comfort.



·        Stay-stitch (stitch straight through all layers to hold together) the front half of the jeans about ¼” below the waistband stitching to secure the fly and pockets.

Stay-stitch 1/4" below waistband seam
 
·        Cut off the waistband where it attaches to the pants. Cut above your stay-stitching.

2) Sew jeans openings closed.

·        (Optional, to simplify dressing) Pin pockets closed and stitch just next to the decorative topstitching on the pocket, through all layers. Your stitching will be hidden in the shadows of the commercial topstitching, especially if you use thread that matches the color of the denim. Stitching the pockets closed keeps them smooth and flat when dressing.

Stitch just beside the decorative stitching. Here, the
presser foot is removed so you can see the needle position.
·        Fuse pocket bag to inside of front leg. Use a permanent fusible adhesive web, such as Heat N Bond, following the manufacturer’s directions. This keeps the pocket bag from riding up inside the pants.
Add the fusible webbing between the pocket bag
and front leg. Fuse with an iron according to
manufacturer's direction.
·        Pin fly closed and stitch. Follow beside the decorative stitching on both the right and left sides of the fly to secure it completely flat.

3) Attach knit waistband.

·        From discarded pull-on pants, cut down 2” to 2 ½” from top of waistband. This will add about 1” in height from the original jean's waistband, helping prevent exposure of undergarments. Enough said. If your original jeans are cut very low, you might choose an even deeper portion of the stretch fabric. Smaller children may require smaller depths.

For a teen, 2-2.5" of knit waistband and fabric
will probably be appropriate. Feel free to vary the width
for your child's needs.
·        Right sides together, match knit waistband to jeans at back, front, and sides. Pin as needed and sew with a 3/8” seam. Be careful not to sew over any decorative rivets in the jeans so you don’t break a needle.

·        (Optional) If you own a serger, overcast the seam for strength and comfort. Otherwise, overcast with a triple zigzag stitch on your sewing machine.
My daughter's service-dog-in-training, Mercer, holds down
the waistband so you can see the overcasting inside.
 
There you have it. In 15-20 minutes, you have converted a pair of fashionable but restrictive jeans into fashionable and comfortable ones. All the decorative pockets and stitching are preserved, with the exception of the waistband. You’ve put those outgrown stretch pants to good use for another year as well.
 
 
 
 

 

DIY Disposable Swim Pants for the Larger Swimmer

Summer's just around the corner...is your older child ready for swimming? You have a few weeks still to dust off your sewing machine and whip up some disposable swim pants.

Can't find disposable swim pants to fit your larger child?
These will fit a 34" hip or 85 pounds.
There are times when disposable swim pants are an ideal solution for swimmers who must wear incontinence protection. They travel easily to summer camp or on vacation where laundering cloth swim pants would be impossible. Some pools require swim pants for children with continence issues.
Even bigger kids can benefit from these handy disposable pants. These adapted swim pants fit up to a size 34” hip or 85 pounds. They can be made in less than 5 minutes a pair.
Note:  I have no vested interest in the Huggies brand shown; it is simply one available in my area. Feel free to substitute with brands you have locally. The brand I’ve used can withstand a few trips through the washer and dryer to extend their use over several wearings (just make sure the Velcro sides are closed before you start the wash, as with all things Velcro). Cool!
Materials needed:
1 pair disposable swim pants, size 4-5T 

1 pair disposable pull-on pants with hook-and-loop side openings, size 4-5T or larger


Sewing machine, thread, scissors

Step One:
Cut side stretch panels off Pull-Ups where they are fused to the main absorbant pant. These will become side extensions to add up to 4” of unstretched width to each side of the swim pant for a total of 8" of added width!

Pull the two sections of each side panel apart and set aside. Do not throw the absorbent main section away, as it can be used to line the inside of another diaper when extra protection is needed (at night, on an airplane, when spending a long day at the mall…).
Cut open the side panels of the swim pants where they are fused to one another. Leave the fused “seam allowance" attached to one side, as this adds ¼” extra width to each side.

The red arrows show the fused seam allowance still attached
to provide a little more width.
Step Two:
Lay one side panel of the Pull-Up face up on the sewing machine bed. Velcro side up, overlap the front side panel of the swim pant by ¼”, matching top and bottom edges. Stitch down the overlapped edge with a plain or 2-step zigzag stitch set at a wide, long stitch.
Wahoo! Pinless sewing... We're aiming for speed and utility here.

I prefer a 2-step zigzag at 2.0 length and 6.0 width. The 2-step zigzag stitch will not tunnel. A 3-step zigzag is commonly found on most machines and will work also; it's just a tad slower to sew out.
This is a "2-step zigzag" stitch, which keeps the stitches from
pulling into a tunnel.
Repeat for second front side panel.
Step Three:
Overlap the longer side panel from the Pull-Up onto the swim pants back panel and zigzag into place. Make sure the Pull-Up is facing up and the Velcro tape is facing down.
If the shape of the extension is longer than the panel on the swim pant, it can simply be cut off after it is sewn.


Repeat for second back panel.
That’s it! In one quick afternoon you can whip up a whole package of large-sized disposable swim pants to take your child through the summer. Now your older child is ready to slip a swimsuit over their protective disposable swim pants and hit the beach or pool insecurity and style!


 Happy swimming!

If you found this tutorial helpful, please share it with a friend. Let's make life a little easier for all those terrific moms and kids who are adapting their lives creatively!

Sneak Peek at the Next G-tube Clothing Tutorial

You are supposed to get a full tutorial this evening, what with today being Tuesday [editorial note: it WAS Tuesday when I worked on this "quick" post. Ha-ha. Blogger does NOT play nice with photos and I need to go to bed before frustration drives me to do something drastic to the laptop. It's not the computer's fault. As a result, this won't get posted until Wednesday. My sanity is not worth the fight. Huge apologies!]. Instead, you get a teaser. Here’s a sneak peek at good things to come, the inseam g-tube access openings!

So many, many possibilities for these two handy techniques! Picture this in a frilly party dress, or a tiered sundress in fun bright prints…


Here's an opening on a gathered skirt...

...so you can get to the g-tube.

…Or this in a sophisticated princes-seam dress, or a little boy’s tailored coveralls…










At least you get to spy on the final samples. It’s the how-to pics that aren’t ready yet, so stay tuned.
Any of you who create online tutorials know just what goes on behind the scenes of a pictorial lesson. Whew! There are some amazing bloggers who post lovely online tutorials several times a week. They make it look so easy; that’s part of the magic. There is a LOT more to it than simply snapping pictures as you merrily sew away…hah!
Given our family schedule this past week, I was pretty pleased to have finished mock-ups to share. Next week you can have a step-by-step play on how to recreate these same openings to access your child’s g-tube.  

In the meantime, why not go shopping for a pattern and fabric and some fun trims? Look for a garment design with a seamline that falls several inches above the waist. Copyright issues mean I can’t post the pattern pictures here, but a quick click will take you to some possible choices:
McCall’s 6155 (girls flared or gathered top, easily lengthened to a dress)
McCall’s 6268  (flared toddler dress)

Butterick 4054 (toddler dress with gathered waist)

Oliver + S School Photo Dress and Tea Party Sundress, both vertical openings

New Look 6451 (princess seams, vertical openings)

New Look 6041 (toddler dress horizontal or vertical options)

Simplicity 2377 (girl's tiered sundress)

Simplicity 2264 (baby boy suit)

McCall’s 4236 (infant saque)
There are lots of GREAT vintage patterns that work well for adapting to g-tube access too!

Disclaimer: I haven’t used any of these particular patterns (my kids have long since outgrown these sizes), but they can give you an idea of styles that work well for these adaptations.

So many, many possibilities for these two handy techniques! Picture this in a frilly party dress, or a tiered sundress in fun bright prints…

You might also find some inspiration here:
Sewing Clothes for G-tube Access, Part One: DESIGN

Sewing Clothes for G-tube Access, Part Two: BLANK CANVAS

PART TWO:  G-TUBE OPENINGS ON A BLANK CANVAS
Lots of easy-to-sew patterns for children (and adults, too!) are made of flat pieces of fabric. One-piece sleepers, A-line dresses, and some overalls and jumpsuits are designed like this. These make a nice “blank canvas” for adding a g-tube access opening.
In addition, some designs sewn with soft, flat seams can be treated as a single piece of flat fabric.

Here are some examples:
To sew welted pocket flaps on this style of garment, we’ll be borrowing much of the same technique used in the tutorial for our g-tube jammies. You can either use our pocket flap pattern template or create your own. I’ll explain how! If you need inspiration for pocket designs, check out the imaginative, informative pocket tutorial series by LiEr at Ikat Bag.
In addition to the supplies needed to sew your garment of choice, you will need the following for each pocket flap:
--a 6 x 9” (or larger, depending on your personal design) piece of fabric, either self-fabric or a contrast color
--a 6 x 9” (or larger, to match changes you made in the fashion fabric size) piece of tricot iron-on interfacing
--3/4” Scotch tape
--a button
--optional trims:  ribbon, braid, lace, ruffles
A note on terms: The edges of this opening are called a welt, just so you know what I am referring to when I say “welt opening.” The fabric that binds the edges of the opening are the lips of the welt; the decorative flap covering the opening is the pocket flap.
Belly button would be about where the dotted red lines cross.
The red circle is about where the g-tuis is located.
1. Mark the position for your g-tube opening after you have cut out the pieces for your garment. If it helps with planning, know that a child’s natural belly button falls generally at or just below where the “waistline” marking on patterns meets the center front. Unfortunately, many pattern companies don't mark the waist on pattern, but the "lengthen/shorten" line is often located at the waist. Transfer the length and angle of the slit onto the garment piece with a wash-away marker or dry sliver of soap. DO NOT CUT OPEN.

2. Prepare the welt and pocket flap pieces. Iron the tricot interfacing to the back of the piece of coordinating fabric. The directions with the iron-on interfacing will give you specific heat and time settings for the brand you are using.
If you use our downloaded pattern, cut out the pieces; you should have two pocket flaps and one welt opening. Across the center of the wrong side of the welt opening fabric, stick one 4” piece of ¾” wide tape (Scotch tape is fine...I outlined mine just to help with the photography).
4" strip of 3/4" Scotch tape stuck on the interfaced side
of the welt fabric

Note: If you design your own pattern, draw the rectangle for the welt pattern the width of your mark PLUS 1.5”. It will be 3” high. For your own design, use a piece of ¾” wide Scotch tape the length of your marking, centered in the rectangle of the welt fabric.

3. Sew the welt opening. In most cases, you will want to apply the welted opening before sewing the garment. This allows you to work on a flat piece of fabric, which is easiest. If you will be applying the welt opening over a seam sewn flat, note that you want to join the garment pieces that make up this seam first and then complete the welted pocket flap opening.
Center the welt fabric, right side together with the right side of the garment fabric, along this line. Pin in place and stitch a box along the outer edge of the Scotch tape, using shorter stitches at the corners. Peel away the tape.


Carefully slit the fabric in the center of the box in a line along the center of the box you just stitched, stopping about ½” from each end. Cut in an angle from each end of the slit to the corners, coming right up to but not through the stitching (see the pattern for a cutting guide). Press flat.
The blue lines show where to slit the welt and garment fabric.

Turn the welt opening through the stitched box to the wrong side. Smooth the fabric so the seam allowances meet at the slit and the welt fabric folds around the seam allowances. Press flat.

This view shows the inside of the garment, where the
folds of the lips meet at the center.

Fold the garment piece back at one end so the triangle of fabric formed when you slit the stitched box is extending out.


Stitch carefully right over the stitching at the end of the box through the end of the welt, being careful to hold the main garment fabric out of the way of your stitching.

Press the welt flat. Stitch with a zigzag (I prefer the “double zigzag stitch” that takes a stitch halfway along each let) about 1/8” away from the outside of the welt.
For  a more tailored look, you might prefer to stitch right in
the well of the seam where the welt and garment fabrics meet.
Another option would be to topstitch 1/8" away from the seam edges,
creating a tidy box around the welt.
Trim the long ends on each side of the welt and round the corners.

4) Add the pocket flap. The pocket flap serves a number of functions:  to cover the opening, to keep the welt from gapping (br-r-r-r), and to provide a decorative accent. Whether using the pocket pattern or a design of your own, sew around all sides but the top with a ¼” seam allowance and clip the corners or curves. Now is the time to sew lace or a ruffle between the layers if you plan to insert it.
Sew pieces right sides together; clip corners.

Turn right sides out, press flat, and topstitch a scant ¼” from the edge. If you are applying braid, rickrack, lace, or other trims on top of the flap, sew them down now. Mark the buttonhole placement and stitch out the buttonhole. Pin the pocket flap right sides against the top edge of the top welt, pointing away from the welts. Stitch across what is now the bottom edge of the pocket flap with a ¼” seam allowance.

Anchor down the pocket flap seam allowance with a zigzag stitch. Fold the flap down, press thoroughly, and stitch down a generous 1/8” to hold the flap flat. Mark for the button placement and sew on a cute button.
Ta-da! A finished welted g-tube opening with a pocket flap.


An APPLIQUE FLAP is sewn in much the same way. You will follow steps 1 and 2 above:  mark the garment and prepare the welt fabric. Step 3, sewing the lips of the welt opening, is nearly the same, with the addition of a small button and button loop. The other materials you need remain the same, except you’ll be substituting an appliqué in place of a pocket flap.
You can purchase an appliqué or create your own. It simply needs to be large enough to cover the lips of the welt opening. Purchased appliqués can be used as is. If you make an appliqué, be sure to a combination of fabric, interfacing, and heavy leave-in stabilizer to give it enough body. Cut cleanly around the edges.
Also, you can use a fake patch pocket as an appliqué. Get some great design ideas at the pocket tutorial series on Ikat Bag. Since this pocket will be “freestanding,” being anchored on only two sides, the simplest way to create the pocket is to sew two same-shaped pieces right sides together. Interface if needed for body. Stitch around ALL sides, clip the corners, make a small slit in the lining piece. Turn right sides out through the slit and whipstitch the slit closed by hand. Add ornamental trimming and topstitching. Later when you attach the pocket, you can also stitch a line for a false “hem” at the top if you like.
3. Sew the welt opening with slight adjustments for the appliqué.  While the main steps for sewing the welt opening will follow the process outlined for pocket flaps, you will need to add a small button loop and button to hold the welt lips closed. For this, use a small ponytail band  (about 1” circle) and a small flat button.
This size ponytail band works well. But
CAUTION! Cut off that metal clamp!

Before you attach the welt piece to your fabric, pinch the ponytail band into a 1.25” loop and anchor at the center of the mark on your fabric with a piece of tape. [Note: if your elastic band has a metal closure, clip it off before trying to sew. No point in breaking a needle!!] The end that will loop around the button should face UP from the mark. When you sew on the welt piece, you will stitch right through the elastic band. Backstitch and trace your forward stitches several times over the area where the band extends upwards to be sure is it caught.

The loop is taped in place for sewing. On this sample,
the ends could have been cut shorter.
Continue sewing the welt opening as explained in the previous section.
When you slit the welt open, you can cut through the ponytail band but be sure to leave about ¼” tails.
After the welt is complete, add a small button to the lower lip.

Completed welt is ready for the applique over the top.
4. Apply an appliqué in place of the pocket flap. The appliqué will center over the welt opening to cover it. Secure the appliqué by stitching along the edge of its upper half. Follow the shaping of the edge. For a false pocket, stitch across the top of the pocket an inch or so below the edge to create a false “hem.” Be sure to backstitch at both ends of your stitching!

Pins mark the backstitching at either end of the line of stitching
that holds the applique in place.
The appliqué lifts at the lower outer corner. To secure the flap when not in use, sew Velcro under the corner of the appliqué. You can stitch the hook side by machine to the garment. Use invisible hand stitches to attach the loop Velcro inside the appliqué.
Here's a peek under the applique. A square of Velcro
sewn to the point of the heart and the garment fabric
will hold it flat when not in use.

I hope you are inspired to sew up some welted g-tube access openings on clothes for your little cutie! Let me know how it goes...


Other posts you might find helpful:

Sewing Clothes for G-tube Access, Part One: DESIGN

PART ONE:  DESIGN
Parents can be amazingly creative. When faced with the challenge of dressing children that eat through g-tubes, they come up with some pretty clever solutions!
Two-piece outfits, such as a shirt and pants or blouse and skirt, tend to give convenient access to the tummy. Most of my daughter’s current wardrobe falls into this two-piece category. It also is a standard way for dressing boys.
But there are times that two-piece outfits just don’t work. Babies and toddlers wear onesies or one-piece pajama sleepers (actually, plenty of older kids do too!). They wear overalls or jumpsuits, especially when learning to crawl or playing often on the floor, because the one-piece outfits are comfortable during all that busy activity. Dresses, whether special occasion or otherwise, are one piece by their very design.
Let’s face it…there’s just something a little less than delicate about crawling up through layers of petticoats and skirts to hook up your daughter’s g-tube. And if she wears a feeding pump in a backpack, tubing that dangles from a skirt hem is just asking for an accident.
Or what about little boys? Boys can be a little less complicated (did I really say less complicated??) because their clothing tends to come as two-piece outfits. And most overalls allow relatively easy side access (many of the commercial overalls my daughters wore were GREAT for g-tube access). Even boys, though, sometimes wear clothes that don’t offer much access to the stomach.
So, what do we do?
There are some clever commercial solutions: Tummy Tunnels, Grab-a-Scab fabric stickers (read a brilliant post on this at Adaptions 4 Kidz), both of which are ironed on to create a “patch” with an opening for g-tube access. These can be applied to off-the-rack clothing, require no sewing, and come in cute styles. But they are a little conspicuous, can be a bit juvenile for older kids, and only work on flat areas of fabric.
If you sew or know of someone who does, a world of creative possibilities for g-tube access unfolds. You can create functional openings that are tailored-and-classy, cute decorative focal points (without even hinting at the presence of a g-tube), or completely hidden. These options are available to work with many children’s sewing patterns, whether on areas of flat fabric or on gathers and pleats. The possibilities are endless!
Let’s get started…
First choose your pattern. We’ll talk about three styles:
1) “Blank canvas.” These styles offer a smooth, flat area of fabric over the g-tube area. Sample “blank canvas” styles include some overalls or coveralls, A-line dresses or jumpers (using American terminology here) and many sleepers:

One last great feature of “blank canvas” designs—most any garment in this category, whether purchased or sewn at home, can be retrofitted with a g-tube access enclosure after it is made!
2) Flat seamline. These styles provide a seam near the g-tube where two flat pieces of fabric join. Examples of these “flat seam” patterns are princess-seam dresses, some tailored dresses, and some overalls and coveralls:

3) Gathered seamline. For this style of pattern, gathered fabric is sewn to a flat panel at a seam near the g-tube. It requires a slightly different method for creating an opening than the flat seamline. Many dresses feature full gathered skirts attached to a smooth-fitted top section; girls’ jumpsuits are also often constructed this way:

Second, choose the opening style. What look do you want? Something sporty? Something cute? Something inconspicuous?
Keep in mind that pocket flaps can be tailored, sporty, cut in cute shapes, or create interest with fun buttons.
Appliqués can be part of a cute design (i.e.: the flowerpot below a fun flower, the boat below a sail) or made from shaped lace (purchased in the bridal section of the fabric store or stitched out with your home embroidery machine, if you are so fortunate). They can even be designed to look like a working pocket!
Sashes (and cummerbunds, for your little ring bearer) are wide bands of fabric, very often gathered, that lift up to reveal a secret opening. Overlays also lift up, and can be designed as plain panels or as false vest or jacket fronts.
Next, sketch your options.  If you are artistic, grab a pencil and paper and start drawing away! You might find good inspiration from a pattern catalog. There are lots of online options if you want some ideas (http://www.sewingpatterns.com/ has catalogs for all the major pattern companies, or go directly to the manufacturer websites).
If you prefer, you can also print out the line drawings found with patterns by larger commercial pattern makers. Use these blanks to sketch out your options.
Keep in mind the placement of your child’s g-tube when you plan the location of the opening. Some people like the opening right over the top of the g-tube. Other people like openings offset to the side or below, finding that it reduces the chance for accidentally catching. These are your creations—feel free to design them in a way that works for your child.
As you sketch your ideas, remember to keep balance and proportion in your design. You need room to maneuver the tubing, so plan a wide enough opening for your fingers, but don’t overwhelm your small child with a giant appliqué. Remember that many tailored designs are symmetrical, so you will want a second mock pocket flap on the right side to balance out the functional flap on the left.

Last, familiarize yourself with the sewing steps for the pattern style and g-tube access treatment you’ve chosen.  We’ll go over these sewing steps in the next few parts of this tutorial. I’ll post the second part today, where we go over the steps for applying pocket flaps and appliqués to a blank canvas. See you back here in a little while!
 Happy sketching!

Split-back Wheelchair Jacket

With winter sneaking up on us in the Northern Hemisphere, the time seems right to show you how to adapt a purchased jacket for wheelchair users. I hope I'm catching you in time for the cold weather where you live!


Normally, I like to use dressing as an opportunity to stretch tight arm and shoulder muscles. I resisted adapting my daughter's coats for a long time just for this reason. However, rushing to catch the morning school bus is NOT the time to be hurrying stiff limbs! The split in the back of these wheelchair jackets reduces the amount of stretching and the risk of injury.

The split-back jacket opens up the back just up to the bottom of the collar/hood. The collar slips behind the child's neck, his arms go into the sleeves, and then the back is closed. Opening the front of the jacket makes it easier to slip arms into the sleeves, but it isn't necessary.

The sewing skills and equipment are very basic. You should be able to complete this project in less than an evening.

The fabric and filling of your jacket make a big difference in ease of sewing. Sweatshirt fleece and PolarFleece are very easy to work with. Denim is only difficult where multiple layers cross at seams. Quilted fiberfill batting is fairly easy but loose filling (such as down or the loose cotton fluff in the white jacket used in the tutorial) is more complicated (and therefore, more time-consuming).

First, the DISCLAIMER:  I recommend trying this technique on an outgrown sweatshirt or junker jacket before cutting into a jacket you value. You can use scrap fabric and skip both the interfacing and Velcro during your practice. The point is to see if the split-back design works for your child. It also builds your confidence with the sewing technique so you won't get sweaty hands during the actual project. I will
do my best to step out the process, but the final results are up to you.

Now, without further ado, the tutorial...

* * * * * * * * *

You will need:

--Purchased jacket (it should be slightly generous in size to make up for the ½” you’ll lose around the chest)

--Sew-in Velcro, approximately 1 yard (you won't use the whole amount, but you will always have use for the extra, so don’t worry about buying more than you need for this project)
--Coordinating cotton fabric, 3-6” wide, prewashed and ironed
--Lightweight iron-on interfacing


1) Draw a line on the center back of the jacket starting 1” below the neck seam to the hem edge. Use a wash-away pen, disappearing marker, or for dark fabrics, tailor’s chalk or a sliver of bar soap to draw your lines.



Soap markings on purple PolarFleece, showing 1" below collar seam
 
Measure this line and write it down.



2) Prepare the underlap by cutting a 3” strip of fabric the length of the line down the center back minus 1.5” (line length - 1.5" = _____). Iron a piece of fusible interfacing to the back. At both short ends, fold right sides together and sew a ¼” seam just along the two short ends.


Turn right sides out, neatening the corners. Match the edges neatly along the length and press flat. 
3) Prepare facing using one of two methods:
            a. Cut a 3"-wide strip of coordinating fabric 3” longer than the line you drew down the jacket back (line length + 3" = ____). Cut a piece of interfacing the same dimensions and fuse to the back of the strip following manufacturer’s directions. Finish the edges by serging (my favorite), zigzagging, or trimming with pinking shears.

            b. Cut a 3.5"-wide strip of coordinating fabric 3.5” longer than the line on the back of the jacket (line length + 3.5" = _____). Cut fusible interfacing the same size. DO NOT fuse just yet. Lay the strips together with the fabric right side meeting the NON-glue side of the interfacing. Sew with a ¼” seam allowance around 3 sides, leaving one short end open.


Trim corners and turn right sides out, smoothing seam allowances and fuse interfacing down. Topstitch around all three sides. 


Turn under the unfinished edge ¼” and topstitch to hold it down. This makes for a neatly finished facing strip (my second favorite method, used when I’m too lazy to change thread colors in the serger).



4) Mark the back of the facing with a line down center, starting 1” below one end (if using the facing is sewn and turned, it should be the enclosed end rather than the folded one) and continuing to the other edge. For the purposes of the tute, I also marked stitching lines 1/4" on either side of this line...you can do this or not.
5) Lay the facing on the back of the jacket, right sides together, matching up the lines. Pin in place, spacing the pins 2-3” apart and running exactly along the line. At the hem edge, fold the excess facing to the inside. Make sure there is no slack where the facing folds under.


6) On the left side of the jacket back, slip the raw edge of the underlap between the facing and the jacket. Center it 1 1/4” below the top of the line and 3/4” above the hem edge. Butt the raw edge of the underlap tight up against the pins; the folded edge should come right to the finished edge of the facing. Pin securely.

7) Starting at the hem edge, backstitch and then sew ¼” down one side of the line.



About 2” from the end of the line near the neck, begin to taper towards the tip, shortening the stitch length (I've marked this with green marker in the photo). Pivot, gradually taper back to ¼” from the line, and sew down the opposite side of the line. Reinforce the tapered point by stitching over the previous stitching for the 2” that makes the taper.



8) Control the bulk from the seam allowances and strengthen the stitching by sewing a narrow zigzag on either side of the line, staying between the line and your previous stitching line. I especially like a double zigzag for this (takes an extra stitch in the middle of each zig and zag, making an especially flat and professional stitch). The stitching won’t fit in the tapered point, but that’s fine because you already reinforced it by stitching twice (you did, didn't you?). If the jacket you are adapting has a loose lining, be sure to check underneath regularly as you zigzag that you aren't catching the lining in your stitching (do you hear the voice of unfortunate experience speaking?).

9) Cut along the line from the hem edge to the tapered point. Cut right up to, but not through, the point. Turn the facing to the middle and press and  flatten the seam allowance with your fingers (don’t use any iron on any jacket unless you know beyond a shadow of a doubt that it won’t melt).

10) Pin hook-side Velcro along “public” side of underlap (the side facing away from the child). If your winters are harsh, use a solid strip the full length of the underlap. Where winters are mild, you can increase the jacket's ability to move with the body by cutting the Velcro in 3" pieces. Place a strip at the neck edge, one at the hem, and 1-3 more along the center edge (the number is determined by the size of the jacket) with approximately 1.5 – 2” between strips. Stitch strips to the underlap with a zigzag.



Pin matching strip/strips of loop-side (soft) Velcro on the loose facing on the right side of the jacket, matching the placement with the hook-side Velcro. Zigzag in place.




10) Arrange the facing neatly to the inside of the jacket and pin. Lengthen your stitch to a 3.0-3.5 and topstitch along the fold.




For flat jackets, on the outer right half of the opening, stitch down the outer edge of the facing. If this side of the facing pulls when the jacket is worn, sew a third line between the topstitching and outer stitching, running right through the soft Velcro to anchor the facing even more firmly. For “puffy coats” with vertical quilting, topstitch along the inner edge of the opening as before. Then, instead of sewing the facing down along its outer edge, stitch vertically through the facing, going right through the quilting lines.




Hand stitch the open edge of the facing to the jacket lining on the inside.




* * * * * * * * * * *

There you go! Now you have a toasty warm jacket that is quick and easy to slip onto your children as they head out the door in their wheelchair. If you have any questions about the directions, please don't hesitate to drop me a comment or a note. I'm happy to clarify!

Inside of cold weather jacket